K-11

SPECIFICATIONS

• Core & U-Bends are coated with an epoxy resin to counter corrosion.

• Versatile drain lines left to right & bottom.

• Medium and low temp applications.

• Digital thermostat is made to optimize accuracy and convenience.

• EC motors-splash proof with 60,000 hours of run time.

• 100V or 239V operation.

• Electronic Defrost.

• Discrete vertical or horizontal mount design.

• Inside terminal block for electrical connections.

• Equipped with a safety divider to prevent outside materials from entering.

• Fully tested & injected with Nitrogen to ensure the equality of the product.

• Warranty on the core coating and thermostat.

• Made in the U.S.A.

WARNING: A MINIMUM OF 2 INCHES MUST BE PROVIDED BETWEEN THE TOP OF COIL, UNIT AND THE TOP OF THE CABINET.

WARRANTIES

Kwick Cool units come with a five-year warranty on the core coating, a three-year warranty on the digital thermostat, and a one-year warranty on the valves. Please refer to the warranty details available in our website.

MAINTENANCE

Regularly check that the unit is free of grease and other debris. Clean when needed. It is advisable to contact a service technician to perform preventive maintenance on your unit.

MOUNTING

The standard flow mullion unit draws air in at the bottom and discharges out the top. The unit can be mounted in a mullion against a rear or side wall.

During installation on the mullion of refrigerators under the counter, mounting holes are located on both ends of the unit for attaching to “customer furnished” mounting screws 5/6” x 1 inch long zip drill screws with washers.

Knockouts are provided for bringing the refrigerant piping through either end of the cabinet. An electrical knockout is provided in an internal junction box.